WhatsBusted
3D model of a dishwasher

Dishwasher (built-in)

Dishwasher repair, from the inside out

A dishwasher is a tub, two racks, a pump that throws water through spinning spray arms, and a second small pump that sends it down the drain.

Pull one apart in 3D to see where each part sits. The step-by-step fixes are being written now.

Parts

What is inside a dishwasher

Tap a part to find it in the model.

  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon
  • Guide coming soon

How it works

How a dishwasher works

It uses a surprisingly small amount of water, heated and recirculated through spinning spray arms.

  1. 1

    Fill

    An inlet valve lets a few quarts of water into the bottom of the tub. A float stops it from overfilling.

  2. 2

    Heat and spray

    A circulation pump pushes the water up through the spray arms. The force of the jets is what spins them.

  3. 3

    Filter and repeat

    Water falls back through a filter and goes around again. A clogged filter is the most common reason for dirty dishes.

  4. 4

    Drain and dry

    A drain pump empties the tub, then heat or a fan dries the dishes.

Model number

Where to find your model number

Open the door. The rating plate is on the edge of the door or the side of the tub opening.

  • Copy the full model number exactly.

Safety first

Before you open a dishwasher

  • Turn off the dishwasher's breaker and close its water supply valve before you pull it out or open panels.
  • The edges of the tub and door panels are sharp. Wear gloves.

Read the full safety rules