Top-load and front-load washers
Washer repair, from the inside out
A washer fills, moves the load through the water, drains and spins. A motor, a pump and a pair of valves do nearly all of it.
Pull one apart in 3D to see where each part sits. Switch between top load and front load to see which parts change. The step-by-step fixes are being written now.
Parts
What is inside a washer
Tap a part to find it in the model. Top load and front load washers share most of them: the switch above the model swaps the ones they do not.
In every washer
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
Top load only
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
Front load only
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
- Guide coming soon
How it works
How a washer works
Fill, wash, drain, spin. A pump and a motor do nearly all of it.
- 1
Fill
Inlet valves open and let hot and cold water into the tub until a pressure sensor says it is full enough.
- 2
Wash
The motor moves the load through the water. A front loader tumbles it in a drum. A top loader with an agitator swirls it around a centre post.
- 3
Drain
A small pump at the bottom pushes the dirty water up and out the drain hose.
- 4
Spin
The drum spins fast to throw water out of the clothes. Dampers or suspension rods keep the tub from shaking the machine apart.
Model number
Where to find your model number
Open the door or lift the lid. The rating plate is on the door frame, just inside the opening, or under the lid.
- Copy the full model number exactly.
Safety first
Before you open a washer
- Unplug the washer and close both water supply valves before you open it up.
- Expect water. There is always some left in the pump and hoses.
