WhatsBusted

Safety first, always

Fixing your own appliance can save a service call. It is never worth an injury. Every guide on this site follows the rules below, and so should you.

Before every repair

  • Kill the power. Unplug it, flip its service switch, or turn off its breaker. Then prove it is off with a tester before you touch a wire.
  • Shut off the gas or water when the guide says to, even if the step looks optional.
  • Let it cool. Burners, heating elements and tanks stay hot long after they switch off.
  • Take a photo before you unplug or unscrew anything. It is the best reassembly manual you will ever have.
  • Wear gloves and eye protection. Sheet metal edges are sharp and dust falls toward your face.

If you smell gas

Do not flip switches, light anything or use a phone indoors. Leave the house, then call your gas utility or emergency services from outside. Do not go back in until you are told it is safe.

Never bypass a safety

Limit switches, pressure switches, rollout switches, thermal fuses and door switches exist to shut an appliance down before something dangerous happens. We will never tell you to jumper one, not even to test it. If a safety keeps tripping, the safety is not the problem.

Repairs we always send to a pro

These carry risks that a how-to guide cannot manage for you, so we do not publish instructions for them:

  • Gas valves, gas lines and gas fittings
  • Burners and heat exchangers
  • Refrigerant and sealed cooling systems
  • The high-voltage section of a microwave

When a symptom points to one of these, the page says so plainly and tells you what to ask for.

Stop and call a pro when

  • You see scorch marks, melted wires, or flame where it should not be.
  • A new part fails again within days or weeks.
  • The repair asks for something you are not comfortable doing. There is no shame in that.

What the difficulty ratings mean

  • Anyone can do itNo tools, or one. A filter change.
  • EasyA screw or two and a plug. Most of our guides.
  • ModerateSeveral steps and some patience. Take photos as you go.
  • HardHeavy parts, tight spaces or careful reassembly. Plan a full afternoon.
  • Pro levelWe explain it so you understand the quote, then tell you to hire it out.

About the numbers

Readings such as ohms, microfarads and temperatures are typical ranges for common parts. Your part may differ. Always check the label on the part or the manual for your model.

Guides describe generic appliances. Yours may be laid out differently. Read our terms for the full fine print.