Gas stove keeps clicking after it lights, or with the knobs off
Most often it is moisture or a crooked cap. Dry it, reseat it, and the clicking stops.
Check these first
Five-minute checks, no tools
Knobs fully off
Check every knob is turned fully to off, not resting near Lite.
Dry the burners
Lift off the caps and heads and let them and the burner bases dry fully. A hair dryer on a cool setting helps.
Caps seated
Reseat each cap flat and centered on the right burner.
Unplug if it will not stop
If the clicking will not stop, unplug the range or switch off its breaker while it dries. The burners can still be used as your manual allows.
Likely causes
Ranked by how often they are the problem
- 1DIY fix
Moisture or misaligned cap
It started after cleaning or a spill, or one cap sits crooked.
Fix the burner caps10–30 min$0 - 2Call a pro
Stuck knob switch
Clicking continues with every knob off and everything dry. Replacing a knob switch means working around the burner valves. Call a pro if you are not sure.
- 3DIY fix
Spark module
Constant clicking on every burner with everything dry and every switch ruled out.
Fix the spark module30 min–1 hr$35–$110
What's happening
What your range is doing
The igniters should click only while a knob is turned to Lite and stop once the burner catches. After a spill, a boil-over or a wash, water in the burner or around the electrode can keep the sparking going.
A cap that sits crooked does the same. If the clicking continues with the burners clean, dry and seated, a switch on one of the knobs may be stuck, or the spark module itself has failed.
Know your limits
When to call a pro
Stop and call a pro if
- You smell gas at any point. Leave the house and call your gas supplier from outside.
- The clicking continues with everything dry, and a knob switch needs replacing.
- You see sparking somewhere other than at the electrodes, or smell burning.
FAQ
Common questions
Is a constantly clicking stove dangerous?
It is mostly a nuisance when the burner is lit or the knobs are off. Dry and reseat the burners; if it continues, unplug the range until it is fixed. If you ever smell gas, leave the house and call your gas supplier.
How long does it take to dry out?
Often a few hours with the caps and heads off. A hair dryer on a cool setting speeds it up.
Why does it only happen on one burner?
That burner is wet, dirty or its cap is off-center, or its electrode is cracked. Look closely at the white porcelain beside it.
Related
Keep going
- SymptomGas stove burner won't lightA gas cooktop burner clicks but will not catch, catches slowly, or does not click at all. Wet or dirty ports and a misaligned cap cause most of these. If no burner sparks, look at power and the spark module.Open guide
- Range partBurner caps and headsGas ranges only. Each surface burner has a head with a ring of small ports and a cap that sits on top. Spills clog the ports, water from cleaning stops the spark, and a cap knocked off-center keeps the flame from catching. Cleaning and reseating them fixes most burners that will not light.Open guide
- Range partSpark moduleGas ranges only. The spark module makes the high-voltage pulses that spark at every burner when you turn a knob to Lite. A failing module gives weak, slow or no sparks at several burners, or clicks constantly. It is usually a few screws and a few plugs.Open guide
Get the next fix before it breaks
A short email when the seasons turn: filters to change, detector batteries to check, and new repair guides. No spam, unsubscribe any time.
We send it with Kit. Privacy
