WhatsBusted
Symptom

Furnace making a loud or strange noise

A furnace is never silent, but a new squeal, rattle, hum or bang is its way of telling you something. The kind of sound narrows it down fast.

Check these first

Five-minute checks, no tools

  • Bang, gas smell or burning smell? Stop

    Repeated bangs at ignition, a burning electrical smell or visible soot mean switch the furnace off and call a pro. If you smell gas, do not touch any switches. Leave the house and call your gas utility from outside.

  • Check the filter

    A whistle often means a clogged or badly fitting filter. Pull it and hold it up to a light. If you cannot see light through it, replace it with the right size.

  • Panels seated and tight

    A rattle is often a loose panel or screw. With the furnace off, check that both doors are seated and their screws are snug.

  • Vents and returns open

    Closed or blocked vents make the blower work harder and can make it whistle or roar. Open them and move furniture off the return grilles.

Likely causes

Ranked by how often they are the problem

  1. 1

    Blower motor or wheel

    DIY fix

    Squealing, screeching or grinding while the blower runs. Worn or dry motor bearings, or a blower wheel that is loose or rubbing its housing. Grinding is the most urgent: keep running it and the motor can fail.

    Fix the blower motor1 hr–2.5 hr$150–$450
  2. 2

    Clogged air filter

    DIY fix

    A whistle while the blower runs. Air is being forced through a dirty or badly fitting filter. It also strains the blower.

    Fix the air filter5–15 min$5–$25
  3. 3

    Loose panel or screws

    DIY fix

    A rattle or buzz that changes when you press on a door or panel. A seated door and snug screws usually fix it.

  4. 4

    Inducer motor

    DIY fix

    A rattle, whine or grind from the small fan on top that starts before the burners light. Often the housing or mount has worked loose. A grinding inducer usually has worn bearings and needs replacing.

    Fix the inducer motor1 hr–2 hr$100–$500
  5. 5

    Run capacitor

    DIY fix

    A hum from the blower compartment but the fan does not spin, or spins slowly. A weak capacitor cannot get the motor started.

    Fix the capacitor15–30 min$10–$50
  6. 6

    Delayed ignition

    Call a pro

    A boom or bang right as the burners light. Gas is building up before it lights. Dirty burners are a common cause. This is a pro call.

  7. 7

    Cracked heat exchanger

    Call a pro

    A rattle right as the blower starts, sometimes with flames that jump or bend. It is not common, but it is serious. Switch the furnace off and have it inspected.

What's happening

What your furnace is doing

A healthy furnace makes a few normal sounds. A soft click as it starts, the hum of the inducer, a whoosh as the burners light, and the steady rush of the blower. A low hum from the blower motor or the transformer can be normal too.

New noises usually come from something that moves. The blower motor and its wheel, the inducer fan, or a panel that has worked loose. Squealing and grinding are friction. Rattling is something loose. Humming is a motor that is straining or not starting.

The one sound to take seriously right away is a boom or bang as the burners light. That is usually delayed ignition: gas builds up for a moment before it lights. Switch the furnace off and call a pro.

Pay attention to when the noise happens. At start-up, while the burners light, when the blower kicks on, or the whole time it runs. That tells you which part to look at.

Know your limits

When to call a pro

Stop and call a pro if

  • You smell gas. Leave the house and call your gas supplier from outside.
  • The furnace booms or bangs as the burners light.
  • You smell burning wires or see soot or scorch marks.
  • A grinding or rattling noise starts the moment the blower comes on and the flames move when it does.
  • The noise is still there after you have checked the filter, the panels and the parts below.

FAQ

Common questions

Is a loud furnace dangerous?

Most noises are wear and tear, not danger. The exceptions are a bang at ignition, a burning electrical smell or soot. For any of those, switch the furnace off and call a pro. A gas smell is different: do not touch any switches. Leave the house and call your gas utility from outside.

Why does my furnace squeal when the blower starts?

Usually worn or dry blower motor bearings, or a blower wheel that has worked loose. Older furnaces with a belt-driven blower can squeal from a worn or slipping belt. See the blower motor guide.

Why does my furnace keep clicking?

A click or two at start-up is normal. Clicking over and over with no heat usually means the furnace keeps trying to light and failing. Start with clicks but won't ignite.

What is the popping or booming in my ducts?

Sheet metal ducts can pop as they warm up and cool down. That is common and harmless, and insulating the ducts can quiet it. A boom from inside the furnace as the burners light is different. That is delayed ignition and needs a pro.

Related

Keep going