Garbage disposal rattling, grinding or clanking
A metal clatter usually means something that is not food is in there. Switch it off and look before you do anything else.
Check these first
Five-minute checks, no tools
Switch off and look
Switch off and unplug it. Shine a light down the drain and remove anything that is not food with tongs.
Turn it by hand
With the power still off, turn the flywheel with a hex key from below. Feel for anything catching.
Check the mount
With the power off, feel whether the unit wobbles where it hangs. Tighten the mounting ring screws evenly if it does.
Likely causes
Ranked by how often they are the problem
- 1DIY fix
Object in the chamber
A spoon, a cap, a pit or a bone rattling around the flywheel.
Fix the unjam it5–15 min$0–$10 - 2DIY fix
Knockout plug inside
A new disposal whose plug was knocked into the chamber and left there.
Fix the dishwasher inlet10–25 min$5–$10 - 3DIY fix
Loose mounting
Loose screws let the unit vibrate against the sink.
Fix the sink flange30 min–1.3 hr$5–$50 - 4DIY fix
Worn bearings or grinding parts
A loud grind, rumble or scrape with an empty chamber. The unit may be wearing out.
Fix the replace the unit1 hr–3 hr$100–$300
What's happening
What your garbage disposal is doing
A healthy disposal grinds while food goes down, then settles to a steady hum once the chamber is empty.
Hard objects bounce around and clatter. In a new unit, a knockout plug left inside can be the culprit.
A unit that rattles against the sink, or moves when you touch it, may have loose mounting screws.
Know your limits
When to call a pro
Stop and call a pro if
- It grinds or rumbles loudly with nothing in it, and gets worse. It is likely time for a new unit.
- You smell burning while it runs.
FAQ
Common questions
Is some noise normal?
Yes. Grinding while food goes down, then a steady hum, is normal. Metal clatter, scraping and loud thumps are not.
Can I put my hand in to get a spoon out?
Never. Switch it off, unplug it, and use tongs or pliers.
My new disposal rattles. Why?
It may be the dishwasher knockout plug, knocked in and left in the chamber. Power off, then fish it out with tongs.
Related
Keep going
- SymptomGarbage disposal hums but won't spinYou flip the switch and hear a hum, but no grinding. Usually the flywheel is jammed. Power off, turn it with a hex key from below, remove the object, and reset.Open guide
- Garbage disposal partJammed flywheelWhen something wedges between the flywheel and the grind ring, the motor hums but cannot turn. Power it off, turn the flywheel with a hex key from below, fish out the object, and reset it.Open guide
- Garbage disposal partSink flange and mounting ringThe sink flange is the metal drain ring in the sink. Plumber's putty seals it, and the mounting ring underneath clamps it and holds the disposal. When the putty dries out or the bolts loosen, it leaks from the top.Open guide
- Garbage disposal partWhole disposal unitWhen the body cracks, it leaks from the bottom or the reset button, or the motor is dead, the disposal gets replaced as a unit. Unhook it, move the cord, hang the new one and reconnect the drains.Open guide
Get the next fix before it breaks
A short email when the seasons turn: filters to change, detector batteries to check, and new repair guides. No spam, unsubscribe any time.
We send it with Kit. Privacy
