Oven not heating? Gas or electric, start here
The cooktop works but the oven stays cold. On an electric range, look at the bake element. On a gas range, watch the igniter. That one look usually settles it.
Check these first
Five-minute checks, no tools
Breaker fully on
Electric ranges use a double breaker. Switch it fully off, then back on. If your panel has two single breakers for the range, check both.
Gas on
Gas ranges only. Make sure the shutoff behind the range is open and the cooktop burners light. If they do not, the problem is the gas supply.
Oven set correctly
Check that the oven is set to bake, not a timed, delayed or Sabbath mode, and that any oven lock is off.
Read any error code
Note the code on the display and look it up in your manual. Many point straight at the sensor. Turn the breaker off for a minute to reset.
Likely causes
Ranked by how often they are the problem
- 1DIY fix
Bake element (electric)
The bottom element stays dark on bake, or shows a blister or break. Broil may still work.
Fix the bake element15–45 min$20–$60 - 2DIY fix
Oven igniter (gas)
The igniter glows but the burner never lights, or lights only after a long wait.
Fix the oven igniter30 min–1 hr$15–$40 - 3DIY fix
Temperature sensor
An error code points to the sensor, or the oven heats briefly and stops.
Fix the temperature sensor15–30 min$15–$35 - 4DIY fix
Control board
The element or igniter and the sensor all test good, but they never get power. Or the display is dead.
Fix the control board30 min–1 hr$90–$400 - 5Call a pro
Oven safety valve (gas)
A new igniter glows bright, the gas is on, and the burner still never lights. Gas valve work is for a pro.
What's happening
What your range is doing
An electric oven heats with a bake element along the bottom and a broil element along the top. Both need the full 240 V. If one half of the range's double breaker trips, the clock may work while the oven does nothing.
A gas oven heats with a bake burner. The igniter glows, and once it draws enough current the safety valve opens and the burner lights. A weak igniter glows but never opens the valve, so you see orange and get no heat.
On both, the control reads a temperature sensor and switches the heat. A failed sensor usually shows an error code; a failed control can leave good parts without power.
Know your limits
When to call a pro
Stop and call a pro if
- You smell gas at any point. Leave the house and call your gas supplier from outside.
- A gas oven lights with a loud whoomp, or flames roll out of the oven.
- A new igniter glows bright and the gas oven still will not light.
- The breaker trips when you turn on the oven.
FAQ
Common questions
The cooktop works but the oven does not. Why?
The cooktop and oven use separate heating parts. On an electric range, the bake element is the usual suspect. On a gas range, it is the oven igniter. A dead clock or display points more to power or the control.
My gas oven igniter glows but nothing happens. Is it broken?
Probably weak. The safety valve opens only once the igniter draws enough current, and a worn igniter can glow without ever getting there. Replace the oven igniter.
Broil works but bake does not. What does that mean?
On an electric range, the bake element has most likely failed. On a gas range with separate bake and broil igniters, the bake igniter is the suspect.
Related
Keep going
- SymptomOven temperature wrongFood burns, stays raw or browns unevenly. Measure the real temperature first. A small, steady offset is often fixed in the settings. A big swing usually means a temperature sensor, an element or igniter that is failing, or a door that does not seal.Open guide
- SymptomGas stove burner won't lightA gas cooktop burner clicks but will not catch, catches slowly, or does not click at all. Wet or dirty ports and a misaligned cap cause most of these. If no burner sparks, look at power and the spark module.Open guide
- Range partBake elementElectric ranges only. The bake element is the heating loop along the bottom of the oven. When it burns out, the oven heats slowly, unevenly or not at all on bake. It is usually two screws and two wires.Open guide
- Range partGas oven igniterGas ranges only. The oven igniter glows to light the bake burner and, at the same time, opens the oven safety valve. A weak igniter still glows but cannot draw enough current to open the valve, so the oven heats slowly or not at all.Open guide
- Range partOven temperature sensorThe temperature sensor is the thin probe on the oven's back wall. It tells the control how hot the oven is. When it drifts or fails, the oven runs too hot or too cool, or the control shows an error and stops heating.Open guide
Get the next fix before it breaks
A short email when the seasons turn: filters to change, detector batteries to check, and new repair guides. No spam, unsubscribe any time.
We send it with Kit. Privacy
